Course Descriptions
Courses offered in Applied Physics for our department Applied Physics and Materials Science is listed below. Be aware that some courses are not offered every year; see the course schedule page to check if the class is offered this year.
Applied Physics Courses

APh/EE 9 ab. SolidState Electronics for Integrated Circuits. 6 units (222); first, third terms. Prerequisites: Successful completion of APh/EE 9 a is a prerequisite for enrollment in APh/EE 9 b. Introduction to solidstate electronics, including physical modeling and device fabrication. Topics: semiconductor crystal growth and device fabrication technology, carrier modeling, doping, generation and recombination, pn junction diodes, MOS capacitor and MOS transistor operation, and deviations from ideal behavior. Laboratory includes computeraided layout, and fabrication and testing of lightemitting diodes, transistors, and inverters. Students learn photolithography, and use of vacuum systems, furnaces, and devicetesting equipment. APh/EE 9b not offered 201920. Instructor: Scherer.

APh 17 abc. Thermodynamics. 9 units (306); first, second, third terms. Prerequisites: Ma 1 abc, Ph 1 abc. Introduction to the use of thermodynamics and statistical mechanics in physics and engineering. Entropy, temperature, and the principal laws of thermodynamics. Canonical equations of state. Applications to cycles, engines, phase and chemical equilibria. Probability and stochastic processes. Kinetic theory of perfect gases. Statistical mechanics. Applications to gases, gas degeneration, equilibrium radiation, and simple solids. Not offered 201920.

APh/EE 23. Demonstration Lectures in Classical and Quantum Photonics. 9 units (306); second term. Prerequisites: Ph 1 abc. This course covers fundamentals of photonics with emphasis on modern applications in classical and quantum optics. Classical optical phenomena including interference, dispersion, birefringence, diffraction, laser oscillation, and the applications of these phenomena in optical systems employing multiplebeam interferometry, Fouriertransform image processing, holography, electrooptic modulation, optical detection and heterodyning will be covered. Quantum optical phenomena like single photon emission will be discussed. Examples will be selected from optical communications, radar, adaptive optical systems, nanophotonic devices and quantum communications. Prior knowledge of quantum mechanics is not required. Instructor: Faraon.

APh/EE 24. Introductory Optics and Photonics Laboratory. 9 units (135); third term. Prerequisites: APh 23. Laboratory experiments to acquaint students with the contemporary aspects of optics and photonics research and technology. Experiments encompass many of the topics and concepts covered in APh 23. Instructor: Faraon.

APh 77 bc. Laboratory in Applied Physics. 9 units (090); second, third terms. Selected experiments chosen to familiarize students with laboratory equipment, procedures, and characteristic phenomena in plasmas, fluid turbulence, fiber optics, Xray diffraction, microwaves, hightemperature superconductivity, blackbody radiation, holography, and computer interfacing of experiments.Not offered 201920.

APh 78 abc. Senior Thesis, Experimental. 9 units (090); first, second, third terms. Prerequisites: instructor's permission. Supervised experimental research, open only to seniorclass applied physics majors. Requirements will be set by individual faculty member, but must include a written report. The selection of topic must be approved by the Applied Physics Option Representative. Not offered on a pass/fail basis. Final grade based on written thesis and oral exam. Instructor: Staff.

APh 79 abc. Senior Thesis, Theoretical. 9 units (090); first, second, third terms. Prerequisites: instructor's permission. Supervised theoretical research, open only to seniorclass applied physics majors. Requirements will be set by individual faculty member, but must include a written report. The selection of topic must be approved by the Applied Physics Option Representative. Not offered on a pass/fail basis. Final grade based on written thesis and oral exam. This course cannot be used to satisfy the laboratory requirement in APh. Instructor: Staff.

APh 100. Advanced Work in Applied Physics. Units in accordance with work accomplished. Special problems relating to applied physics, arranged to meet the needs of students wishing to do advanced work. Primarily for undergraduates. Students should consult with their advisers before registering. Graded pass/fail.

Ae/APh/CE/ME 101 abc. Fluid Mechanics. 9 units (306); first, second, third terms. Prerequisites: APh 17 or ME 11 abc, and ME 12 or equivalent, ACM 95/100 or equivalent (may be taken concurrently). Fundamentals of fluid mechanics. Microscopic and macroscopic properties of liquids and gases; the continuum hypothesis; review of thermodynamics; general equations of motion; kinematics; stresses; constitutive relations; vorticity, circulation; Bernoulli's equation; potential flow; thinairfoil theory; surface gravity waves; buoyancydriven flows; rotating flows; viscous creeping flow; viscous boundary layers; introduction to stability and turbulence; quasi onedimensional compressible flow; shock waves; unsteady compressible flow; and acoustics. Instructors: Austin, Colonius.

Ae/APh 104 abc. Experimental Methods. 9 units (306) first term, (063) second, third terms. Prerequisites: ACM 95/100 ab or equivalent (may be taken concurrently), Ae/APh/CE/ME 101 abc or equivalent (may be taken concurrently). Lectures on experiment design and implementation. Measurement methods, transducer fundamentals, instrumentation, optical systems, signal processing, noise theory, analog and digital electronic fundamentals, with data acquisition and processing systems. Experiments (second and third terms) in solid and fluid mechanics with emphasis on current research methods. Instructor: McKeon.

APh/MS 105 abc. States of Matter. 9 units (306); first, second, third terms. Prerequisites: APh 17 abc or equivalent. Thermodynamics and statistical mechanics, with emphasis on gases, liquids, materials, and condensed matter. Effects of heat, pressure, and fields on states of matter are presented with both classical thermodynamics and with statistical mechanics. Conditions of equilibrium in systems with multiple degrees of freedom. Applications include ordered states of matter and phase transitions. The three terms cover, approximately, thermodynamics, statistical mechanics, and phase transitions. APh/MS 105 ab not offered 201920. APh/MS 105 c Instructor: Fultz.

APh 109. Introduction to the Micro/Nanofabrication Lab. 9 units (063); first, second, third terms. Introduction to techniques of microand nanofabrication, including solidstate, optical, and microfluidic devices. Students will be trained to use fabrication and characterization equipment available in the applied physics micro and nanofabrication lab. Topics include Schottky diodes, MOS capacitors, lightemitting diodes, microlenses, microfluidic valves and pumps, atomic force microscopy, scanning electron microscopy, and electronbeam writing. Instructors: Troian, Ghaffari.

APh 110. Topics in Applied Physics. 2 units (200); first, second terms. A seminar course designed to acquaint advanced undergraduates and firstyear graduate students with the various research areas represented in the option. Lecture each week given by a different member of the APh faculty, who will review his or her field of research. Graded pass/fail. Instructor: Bellan.

APh 114 abc. SolidState Physics. 9 units (306); first, second, third terms. Prerequisites: Ph 125 abc or equivalent. Introductory lecture and problem course dealing with experimental and theoretical problems in solidstate physics. Topics include crystal structure, symmetries in solids, lattice vibrations, electronic states in solids, transport phenomena, semiconductors, superconductivity, magnetism, ferroelectricity, defects, and optical phenomena in solids. Instructors: Atwater, Schwab.

APh/Ph 115. Physics of Momentum Transport in Hydrodynamic Systems. 12 units (309); second term. Prerequisites: ACM 95 or equivalent. Contemporary research in many areas of physics requires some knowledge of the principles governing hydrodynamic phenomena such as nonlinear wave propagation, symmetry breaking in pattern forming systems, phase transitions in fluids, Langevin dynamics, micro and optofluidic control, and biological transport at low Reynolds number. This course offers students of pure and applied physics a selfcontained treatment of the fundamentals of momentum transport in hydrodynamic systems. Mathematical techniques will include formalized dimensional analysis and rescaling, asymptotic analysis to identify dominant force balances, similitude, selfsimilarity and perturbation analysis for examining unidirectional and Stokes flow, pulsatile flows, capillary phenomena, spreading films, oscillatory flows, and linearly unstable flows leading to pattern formation. Students must have working knowledge of vector calculus, ODEs, PDEs, complex variables and basic tensor analysis. Advanced solution methods will be taught in class as needed. Instructor: Troian.

APh/Ph/Ae 116. Physics of Thermal and Mass Transport in Hydrodynamic Systems. 12 units (309); third term. Prerequisites: ACM 95 or equivalent and APh/Ph 115 or equivalent. Contemporary research in many areas of physics requires some knowledge of how momentum transport in fluids couples to diffusive phenomena driven by thermal or concentration gradients. This course will first examine processes driven purely by diffusion and progress toward description of systems governed by steady and unsteady convectiondiffusion and reactiondiffusion. Topics will include Fickian dynamics, thermal transfer in Peltier devices, LifshitzSlyozov growth during phase separation, thermocouple measurements of oscillatory fields, reactiondiffusion phenomena in biophysical systems, buoyancy driven flows, and boundary layer formation. Students must have working knowledge of vector calculus, ODEs, PDEs, complex variables and basic tensor analysis. Advanced solution methods such as singular perturbation, SturmLiouville and Green's function analysis will be taught in class as needed. Instructor: Troian.

Ph/APh/EE/BE 118 abc. Physics of Measurement. 9 units (306); first, third terms. Prerequisites: Ph 127, APh 105, or equivalent, or permission from instructor. This course focuses on exploring the fundamental underpinnings of experimental measurements from the perspectives of responsivity, noise, backaction, and information. Its overarching goal is to enable students to critically evaluate real measurement systems, and to determine the ultimate fundamental and practical limits to information that can be extracted from them. Topics will include physical signal transduction and responsivity, fundamental noise processes, modulation, frequency conversion, synchronous detection, signalsampling techniques, digitization, signal transforms, spectral analyses, and correlations. The first term will cover the essential fundamental underpinnings, while topics in second term will include examples from optical methods, highfrequency and fast temporal measurements, biological interfaces, signal transduction, biosensing, and measurements at the quantum limit. Part c not offered in 201920. Instructor: Roukes.

MS/APh 122. Diffraction, Imaging, and Structure. 9 units (045); first term. Prerequisites: MS 132, may be taken concurrently. Experimental methods in transmission electron microscopy of inorganic materials including diffraction, spectroscopy, conventional imaging, high resolution imaging and sample preparation. Weekly laboratory exercises to complement material in MS 132. Instructor: Ahn.

APh/EE 130. Electromagnetic Theory. 9 units (306); first term. Electromagnetic fields in vacuum: microscopic Maxwell's equations. Monochromatic fields: Rayleigh diffraction formulae, Huyghens principle, RayleighSommerfeld formula. The FresnelFraunhofer approximation. Electromagnetic field in the presence of matter, spatial averages, macroscopic Maxwell equations. Helmholtz's equation. Groupvelocity and groupvelocity dispersion. Confined propagation, optical resonators, optical waveguides. Single mode and multimode waveguides. Nonlinear optics. Nonlinear propagation. Second harmonic generation. Parametric amplification. Not offered 201920.

EE/APh 131. Light Interaction with Atomic SystemsLasers. 9 units (306); second term. Prerequisites: APh/EE 130. Lightmatter interaction, spontaneous and induced transitions in atoms and semiconductors. Absorption, amplification, and dispersion of light in atomic media. Principles of laser oscillation, generic types of lasers including semiconductor lasers, modelocked lasers. Frequency combs in lasers. The spectral properties and coherence of laser light. Not offered 201920. Instructor: Yariv.

APh/EE 132. Special Topics in Photonics and Optoelectronics. 9 units (306); third term. Interaction of light and matter, spontaneous and stimulated emission, laser rate equations, modelocking, Qswitching, semiconductor lasers. Optical detectors and amplifiers; noise characterization of optoelectronic devices. Propagation of light in crystals, electrooptic effects and their use in modulation of light; introduction to nonlinear optics. Optical properties of nanostructures. Not offered 201920.

Ph/APh 137 abc. Atoms and Photons. 9 units (306); first, second terms. Prerequisites: Ph 125 abc or equivalent, or instructor's permission. This course will provide an introduction to the interaction of atomic systems with photons. The main emphasis is on laying the foundation for understanding current research that utilizes cold atoms and molecules as well as quantized light fields. First term: resonance phenomena, atomic/molecular structure, and the semiclassical interaction of atoms/molecules with static and oscillating electromagnetic fields. Techniques such as laser cooling/trapping, coherent manipulation and control of atomic systems. Second term: quantization of light fields, quantized light matter interaction, open system dynamics, entanglement, master equations, quantum jump formalism. Applications to cavity QED, optical lattices, and Rydberg arrays. Third term [not offered 1920]: Topics in contemporary research. Possible areas include introduction to ultracold atoms, atomic clocks, searches for fundamental symmetry violations, synthetic quantum matter, and solid state quantum optics platforms. The emphasis will be on reading primary and contemporary literature to understand ongoing experiments. Instructors: Hutzler, Endres.

APh/Ph 138 ab. Quantum Hardware and Techniques. 9 units (306); second and third terms. Prerequisites: Ph 125 abc or Ph 127 abc or Ph 137 ab or instructor's permission. This class covers multiple quantum technology platforms and related theoretical techniques, and will provide students with broad knowledge in quantum science and engineering. It will be split into threeweek modules covering: applications of nearterm quantum computers, superconducting qubits, trapped atoms and ions, topological quantum matter, solid state quantum bits, tensorproduct states. Instructors: Chen, Endres, Faraon, Hsieh, Minnich, Painter.

EE/APh 149. Frontiers of Nonlinear Photonics. 9 units (306); second term. This course overviews recent advances in photonics with emphasis on devices and systems that utilize nonlinearities. A wide range of nonlinearities in the classical and quantum regimes is covered, including but not limited to second and thirdorder nonlinear susceptibilities, Kerr, Raman, optomechanical, thermal, and multiphoton nonlinearities. A wide range of photonic platforms is also considered ranging from bulk to ultrafast and integrated photonics. The course includes an overview of the concepts as well as review and discussion of recent literature and advances in the field. Instructor: Marandi.

APh 150. Topics in Applied Physics. Units and terms to be arranged. Content will vary from year to year, but at a level suitable for advanced undergraduate or beginning graduate students. Topics are chosen according to the interests of students and staff. Visiting faculty may present portions of this course.

APh 156 abc. Plasma Physics. 9 units (306); first, second, third terms. Prerequisites: Ph 106 abc or equivalent. An introduction to the principles of plasma physics. A multitiered theoretical infrastructure will be developed consisting of the HamiltonLagrangian theory of charged particle motion in combined electric and magnetic fields, the Vlasov kinetic theory of plasma as a gas of interacting charged particles, the twofluid model of plasma as interacting electron and ion fluids, and the magnetohydrodynamic model of plasma as an electrically conducting fluid subject to combined magnetic and hydrodynamic forces. This infrastructure will be used to examine waves, transport processes, equilibrium, stability, and topological selforganization. Examples relevant to plasmas in both laboratory (fusion, industrial) and space (magnetosphere, solar) will be discussed. Instructor: Bellan.

BE/APh 161. Physical Biology of the Cell. 12 units (309); second term. Prerequisites: Ph 2 ab and ACM 95/100 ab, or background in differential equations and statistical and quantum mechanics, or instructor's written permission. Physical models applied to the analysis of biological structures ranging from individual proteins and DNA to entire cells. Topics include the force response of proteins and DNA, models of molecular motors, DNA packing in viruses and eukaryotes, mechanics of membranes, and membrane proteins and cell motility. Instructor: Phillips.

EE/APh 180. Nanotechnology. 6 units (303); first term. This course will explore the techniques and applications of nanofabrication and miniaturization of devices to the smallest scale. It will be focused on the understanding of the technology of miniaturization, its history and present trends towards building devices and structures on the nanometer scale. Examples of applications of nanotechnology in the electronics, communications, data storage and sensing world will be described, and the underlying physics as well as limitations of the present technology will be discussed. Instructor: Scherer.

APh/EE 183. Physics of Semiconductors and Semiconductor Devices. 9 units (306); third term. Principles of semiconductor electronic structure, carrier transport properties, and optoelectronic properties relevant to semiconductor device physics. Fundamental performance aspects of basic and advanced semiconductor electronic and optoelectronic devices. Topics include energy band theory, carrier generation and recombination mechanisms, quasiFermi levels, carrier drift and diffusion transport, quantum transport. Instructor: NadjPerge.

APh 190 abc. Quantum Electronics. 9 units (306); first, second, third terms. Prerequisites: Ph 125 or equivalent. Generation, manipulations, propagation, and applications of coherent radiation. The basic theory of the interaction of electromagnetic radiation with resonant atomic transitions. Laser oscillation, important laser media, Gaussian beam modes, the electrooptic effect, nonlinearoptics theory, second harmonic generation, parametric oscillation, stimulated Brillouin and Raman scattering. Other topics include light modulation, diffraction of light by sound, integrated optics, phase conjugate optics, and quantum noise theory. Not offered 201920.

APh 200. Applied Physics Research. Units in accordance with work accomplished. Offered to graduate students in applied physics for research or reading. Students should consult their advisers before registering. Graded pass/fail.

Ph/APh 223 ab. Advanced CondensedMatter Physics. 9 units (306); second, third terms. Prerequisites: Ph 125 or equivalent, or instructor's permission. Advanced topics in condensedmatter physics, with emphasis on the effects of interactions, symmetry, and topology in manybody systems. Ph/Aph 223a covers second quantization, HartreeFock theory of the electron gas, Mott insulators and quantum magnetism, bosonization, quantum Hall effects, and symmetry protected topological phases such as topological insulators. Ph/APh 223b will continue with BCS theory of superconductivity, GinzburgLandau theory, elements of unconventional and topological superconductors, theory of superfluidity, BoseHubbard model and bosonic Mott insulators, and some aspects of quantum systems with randomness. Instructors: Alicea, Kitaev.

APh 250. Advanced Topics in Applied Physics. Units and term to be arranged. Content will vary from year to year; topics are chosen according to interests of students and staff. Visiting faculty may present portions of this course. Instructor: Staff.

APh/MS 256. Computational Solid State Physics and Materials Science. 9 units (333); third term. Prerequisites: Ph 125 or equivalent and APh 114 ab or equivalent. The course will cover firstprinciples computational methods to study electronic structure, lattice vibrations, optical properties, and charge and heat transport in materials. Topics include: Theory and practice of Density Functional Theory (DFT) and the totalenergy pseudopotential method. DFT calculations of total energy, structure, defects, charge density, bandstructures, density of states, ferroelectricity and magnetism. Lattice vibrations using the finitedifference supercell and Density Functional Perturbation Theory (DFPT) methods. Electronelectron interactions, screening, and the GW method. GW bandstructure calculations. Optical properties, excitons, and the GWBethe Salpeter equation method. Ab initio Boltzmann transport equation (BTE) for electrons and phonons. Computations of heat and charge transport within the BTE framework. If time permits, selected advanced topics will be covered, including methods to treat vander Waals bonds, spinorbit coupling, correlated materials, and quantum dynamics. Several laboratories will give students direct experience with running firstprinciples calculations. Not offered 201920.

APh 300. Thesis Research in Applied Physics. Units in accordance with work accomplished. APh 300 is elected in place of APh 200 when the student has progressed to the point where his or her research leads directly toward a thesis for the degree of Doctor of Philosophy. Approval of the student's research supervisor and department adviser or registration representative must be obtained before registering. Graded pass/fail.